Technische Universität Wien
> Zum Inhalt

Permanent staff

Ao. Univ. Prof. Dipl.-Ing. Dr.techn. Christian EDTMAIER

Tel. +43/1/58801-16135
Fax: +43/1/58801-916135
e-mail: christian.edtmaier@tuwien.ac.at

Name Ao. Univ. Prof. Dipl.-Ing. Dr.techn. Christian EDTMAIER
Educational Background 1975-1983 Real-Gymnasium Schärding, Upper Austria
1983-1990 Mechanical Engineering at Vienna University of Technology, with emphasis on Process Engineering. Diploma thesis "UNTERSUCHUNGEN ZUR KOMPRESSIBILITÄT VON PRECOATSCHICHTEN AN FILTERNDEN ENTSTAUBERN"
1990-1993 PhD Studies and Doctoral Thesis at Vienna University of Technology: "UNTERSUCHUNGEN ZUR HERSTELLUNG VON DISPERSIONSVERFESTIGTEN PLATINWERKSTOFFEN" under the auspices of Prof. Dr. G. Jangg, Institute for Chemical Technology of Inorganic Materials and in cooperation with SCHOTT-Glas/Mainz, Germany
Qualification 07/1986 - 09/1986 Fill Anlagenbau - Gurten/OÖ: techn. construction and calculation of machine-tools and plant engineering
07/1989 - 10/1989 ISCOR (Iron and Steel Corporation) - Newcastle/Rep. of South Africa: exchange student within the framework of IAESTE-program (Internat. Association for the Exchange of Students for Technical Experience): Optimization of relevant process plants of the coking and pig-iron production
1993-1995 refundierter Vertragsassistent (means project assistant directly paid by a company but employed at TU Vienna) at TUW/Institute for Chemical Technology of Inorganic Materials
1995-2003 Univ. Ass., head of research group "Technology of Precious Metals and Recycling" within the Institute for Chemical Technology of Inorganic Materials at TU-Vienna
since 2003 Head of research group "Nano-Materials and Composites" within the Institute of Chemical Technologies and Analytics at TU-Vienna
2005-2017 appointment as Ass. Prof.
since 2017 Habilitation, appointment as Ao. Univ.Prof.
Reviewer/Editor for scientific journals Journal of Materials Science, Springer Verlag, ISSN 0022-2461
Powder Metallurgy, Maney Publishing, ISSN 1743-2901
Composites Part A-Applied Science and Manufacturing, Elsevier, ISSN 1359-835X
Composites Part B-Engineering, Elsevier, ISSN 1359-8368
Diamond and Related Materials, Elsevier, ISSN 0925-9635
International Journal of Materials Research, Hanser, ISSN 1862-5282
Aerospace Science and Technology, Elsevier, ISSN 1270-9638
Emerging Materials Research, ICE, ISSN 2046-0147
Materials Science and Technology, Maney Publishing, ISSN 1743-2847
Composite Science and Technology, Elsevier, ISSN 0266-3538
Powder Metallurgy Progress, Slovak Academy of Science, Kosice, Slovakia/M.Selecka ed., Publisher: Institute of Materials Research
Hydrometallurgy, Elsevier, ISSN 0304-386X
Plasma Science and Technology, IOP Publishing Ltd., ISSN 1009-0630
Ceramics International, Elsevier, ISSN 0272-8842
Transactions of Nonferrous Metals Society of China, Elsevier, ISSN 1003-6326
Fusion Science and Technology, American Nuclear Society, ISSN 1536-1055
Surface and Coatings Technology, Elsevier, ISSN 0257-8972
Guest Editor Materials Science Forum, TTP, ISSN 0255-5476
Guest Editor International Journal of Refractory Metals and Hard Materials, Elsevier, ISSN 0263-4368
Editorial Board Member World of Metallurgy - Erzmetall

Awards

Award Institution Year
1st Place Oral-Poster Presentation DGM 22. Symposium Verbundwerkstoffe und Werkstoffverbunde 2019, Kaiserslautern 2019
Best Teacher TU Wien 2018
Pro Didactica-Fairste Beurteilung Fachschaft "Technische Chemie" der TU Wien 2018
Pro Didactica-Beste Betreuung und Unterlagen Fachschaft "Technische Chemie" der TU Wien 2016
Pro Didactica-Fairster Leistungsnachweis Fachschaft "Technische Chemie" der TU Wien 2016
Pro Didactica-Beste Laborbetreuung Fachschaft "Technische Chemie" der TU Wien 2012
Pro Didactica-Beste Betreuung Fachschaft "Technische Chemie" der TU Wien 2010

Actual scientific staff - bachelor/master/PhD degree students, visiting scientists

Name Scientific work
Maximilian WOLF Hartmetalle mit gamma/gamma´ Superlegierungsgefüge
Ufuk YILMAZ Herstellung und Eigenschaften von High entropy Alloys
Stefan CULIC Optimierung des Strangpressens von Al-Mg-Si Legierungen
Toni BAKOVIC Herstellung und Charakterisierung von Lotkugeln mittels Gasverdüsung
Tobias BAUERNFEIND Entwicklung innovativer Metallmatrix-Composite für Weltraum-, und Raketenanwendungen
Peter STEINSCHADEN Galvanoforming

Alumni / former group members

Name Scientific work Year
Christiane GROHER Substrate-activation approach for the chemical bath deposition of ZnO compact layers 2020 / thesis
Kristina HOFER Charakterisierung von Erz-Konzentraten und ihr Verhalten beim Druckaufschluss 2020 / thesis
Bernhard KLAMPFL Soldering of optical components to CTE-matched substrates for space applications 2020 / thesis
Tobias BAUERNFEIND Herstellung von endlosfaserverstärkten Carbonfaser-Metallmatrix Verbundwerkstoffen über galvanische Matrixabscheidung 2019 / thesis
Luc VUILLEMOT (Univ. Bordeaux, F) Metal Matrix Composite Rocket Nozzle 2019 / internship
Diego NORENA (Univ. Bordeaux, F) Designing electronic circuits for rocket engine testing facility 2019 / internship
Moritz SCHWINGENSCHLÖGL High Entropy Alloys als Binderphase in WC-Verbundwerkstoffen 2019 / thesis
Marko SCHEFBERGER Ortsaufgelöste Untersuchung der Abbaumechanismen beim Hammerbohren auf Armierungsstahl 2019 / thesis
Alexander OTTE Mechanische Eigenschaften niedrig schmelzender Lote 2019 / bachelor's thesis
Georg HATZL High Entropy Alloys in WC-Cermets 2019 / bachelor's thesis
Gernot FROSCHAUER Hochwärmeleitende Verbundwerkstoffe mit niedrigschmelzenden Matrixlegierungen 2018 / bachelor's thesis
Markus LUNZER Lotwerkstoffe für thermal management Anwendungen 2018 / bachelor's thesis
Vincent PASQUIER (Univ. Bordeaux, F) Characterisation of Al/diamond composites 2018 / internship
Jakob SEGL Influence of the Diamond Surface Modification on the Thermophysical Properties of Metal/Diamond Composites 2018 / PhD thesis
Maximilian WOLF Hartmetalle mit ausscheidungsgehärtetem Binder 2018 / bachelor's thesis
Simon SCHERRER Herstellung von bio-inspirierten Metallmatrix-Verbundwerkstoffen 2017 / bachelor's thesis
Christoph FELDBAUMER mechanical properties of Al/diamond MMCs 2017 / bachelor's thesis
Felix EDER Herstellung hochporöser Nickelkörper mit gerichteter Porenstruktur 2017 / bachelor's thesis
Felix FRANK recovery of tungsten valuable scrap material 2017 / bachelor's thesis
Benjamin MEIXNER highly porous Al-bodies with graded pore structure by salt-templating 2017 / bachelor's thesis
Johannes EßMEISTER radially graded pore structure in porous Ni bodies 2017 / bachelor's thesis
Niklas BODENMÜLLER highly porous Ni and Ni-ceramic composites with graded pore structure 2017 / bachelor's thesis
Mohammadreza GORJI Fabrication of Ni/TiC infiltrated nanocomposite coating 2017 / PhD thesis, visiting scholar
Anna BLEIER Verbundwerkstoffe auf Basis WC-Co-Cu 2017 / thesis
Alice AGUIRRE (Univ. Bordeaux, F) Gamma prime strengthened binder in hardmetals 2017 / internship
Michele-Marie LAPORTE (Univ. Bordeaux, F) Loop heat pipe with porous wick 2017 / internship
Thomas STADLER Wolframcarbid/Silber-Kontaktwerkstoffe durch Gasdruckinfiltration 2017 / thesis
Christian WEISSENSTEINER Recovery of tungsten valuable scrap 2017 / post-doc
Barbara OSINGER freeze casting of Ni and Ni-YSZ 2016 / bachelor's thesis
Ivan BOGACHEV (Univ. of Cambridge, GB) Solid state sintering of Ni and stainless steel composites with diamond or SiC 2016 / internship
Cornelia BISCHOF Cu-MMCs by gas pressure assisted infiltration 2016 / thesis
Thomas STEPAN interface condcutance in particulate MMCS 2016 / thesis
Bettina RITT WC-diamond composites 2016 / thesis
Maximilan KLAMM WC-diamond composites 2016 / bachelor's thesis
Konstanze WALZER Investigations in the Co-Cu-C-W system 2016 / bachelor's thesis
Elias ASCHAUER wettability behaviour of metallic melts on carbonaceous substrates by sessile drop method 2015 / thesis
Christian WEISSENSTEINER Chemical recycling of hardmetals 2015 / PhD thesis
Markus HOFER wear behaviour of Al-, Fe-, Ni-MMCs 2015 / bachelor's thesis
Stephanie GREIL mechanical properties of mint alloys 2015 / thesis
Dilan ADLIM internal oxidation od ternary Ag alloys 2015 / bachelor's thesis
Ines DEBAY (Univ. Bordeaux, F) Interpenetrating MMCs 2015 / internship
Océane VIDAL (Univ. Bordeaux, F) Al- & Ag/diamond MMCs 2014 / internship
Elise BRUNET (AIT) Fabrication of Tin Oxide Nanowire Gas Sensors 2014 / PhD thesis
Jakob SEGL Ag&Al/diamond MMCs for heat sink applications 2014 / thesis
Christina DRECHSEL thermo-physical properties of Ag-, and Al-alloys 2013 / bachelor's thesis
Cornelia BISCHOF Ag/diamond MMCs for heat sink applications 2014 / bachelor's thesis
Robert HELLEIN Ag/diamond MMCs for heat sink applications 2012-13 / thesis
Alexander SCHMID W/Cu graded composite interlayers for fusion applications 2013 / bachelor's thesis
Alexandre FOSSAT (Univ. Bordeaux, F) Wear behaviour of hardfacing materials 2013 / internship
Carmen REISCHL C-fibre reinforced MMCs 2013 / bachelor's thesis
Bartlomiej CIECZKA PVD coated hardfacing materials 2013 / bachelor's thesis
Velibor LAZAREVIC Untersuchungen von Hartstoffphasen für Verschleissschutzschichten durch Plasmaauftragsschweissen 2013 / bachelor's thesis
Klemens DANZINGER PVD-beschichtete Hartstoffphasen in Verschleissschutz-Werkstoffen 2012 / bachelor's thesis
Gerald SINGER Oberflächenmodifikation von Hartstoffphasen 2012 / bachelor's thesis
Guillaume MOUNIC (Univ. Bordeaux, F) MMCs for heat sinks 2012 / internship
Christian WEISSENSTEINER Selective dissolution behaviour of W-scraps 2012 / thesis
Denise TAUSSIG Selective dissolution behaviour of W-scraps 2012 / bachelor's thesis
Lena PILZ Pre-sintering behaviour of Mo 2011 / thesis
Marie-Christine HUEMER thermal conductivity of Ag/diamond composites from cryo temperatures to RT 2011 / bachelor's thesis
Anna BLEIER Al/C-fibre composites by LMI 2011 / bachelor's thesis
Benoît GRENIER (Univ. Bordeaux, F) thermo-physical properties of Ag/diamond and Ag/Cf composites 2011 / internship
Geoffrey ECHIRPEAU (Univ. Bordeaux, F) thermo-physical properties of Ag/diamond and Ag/Cf composites 2011 / internship
Stephan STEINHAUER (AIT) Herstellung, Charakterisierung und Anwendung von Kupferoxid-Nanodrähten 2011 / thesis
Christian WEISSENSTEINER low temperature thermal properties of Al/diamond MMCs 2010 / bachelor's thesis
Sarah HURCH Ag/C-fibre composites by LMI 2010 / bachelor's thesis
Timothy Alexander KEPPERT Cu/C-Nanotube MMCs 2010 / thesis
Robert C. HULA C-fibre reinforced composites for heat-sink applications 2010 / PhD thesis
Stefanie HUBER graded W/Cu interlayers for fusion applications 2010 / thesis
Benjamin VERNIER (Univ. Bordeaux, F) low temperature properties of diamond composites 2010 / internship
Alix LADAM (Univ. Bordeaux, F) Ti-SiC composites 2010 / internship
Julia SYNEK particle reinforced silver-MMCs 2010 / thesis
Victoria APOLONER C-Nanotube MMCs for heat sinks in space applications 2010 / thesis
Thomas STECK Carbonnanotubes-Silbermatrix-Verbundwerkstoffe für die Anwendung als Heatsinkmaterial 2008 / thesis
Thomas KONEGGER Herstellung und Charakterisierung von Kohlenstofffaser-Silbermatrix-Verbundwerkstoffen 2007 / thesis
Thomas JANHSEN Untersuchungen über Metall-Matrix-Komposite mit Multi-Wall-Carbon-Nanotubes und Graphitfasern 2007 /PhD thesis
Judith JANUSCHEWSKY Synthese und Charakterisierung von Nanostrukturen aus Wolfram-, und Molybdänoxiden auf Silizium 2007 / thesis
Robert C. HULA Silberbeschichtung von Wolframcarbidpulvern zur Anwendung in elektrischen Kontaktwerkstoffen 2007 / thesis
Florian HUBER Herstellung und Charakterisierung von Partikel-, und Langfaserverstärkten Molybdän-Kupfer- und Wolfram-Kupfer-Kompositen 2006 / thesis
Waltraud HIMMLER Stromlose Verkupferung von W-Pulvern und ihr Einsatz in der W-Cu-Kompositherstellung 2005 / thesis
Ulrich KASTNER Ammoniakalisches Lösen von W/Cu-Schrotten 2005 / thesis (with SMET group)
Christina MEISSL Herstellung mikro-, und nanokristalliner Cobaltoxid- und Cobaltmetallpulver 2004 / PhD thesis (with SMET group)
Christopher VEITSCH Beschichtung von Wolframcarbidpulvern mit Cobaltmetall 2004 / thesis (with SMET group)
Eva WALLNÖFER Herstellung von Kupfer- und Silber-MMCs mit Carbon Nanofasern 2003 /thesis
Johanna WENZEL Wertstoffrecycling magnesiumhältiger Sekundärrohstoffe 2002 /thesis
Christina MEISSL Synthese von Cobaltoxiden und -hydroxiden 2001 /thesis
Pavol SVEC Raffination von Platin durch Vakuuminduktionsschmelzen 2000 / PhD thesis
Patrik LEHRNER Pulvermetallurgische ICP-AES-Edelmetallstandards 2000 / PhD thesis
Christoph EGLSÄER Herstellung und Charakterisierung von ODS-PtRh10-Werkstoffen 2000 / thesis
Patrik LEHRNER Herstellung von Reinplatin- und PtAu5-ICP-AES-Standards 1998 / thesis